Конвертер/Converter, UTP/STP<=>Fiber Optic, 10 Base-T<= > 10 Base-FL, RJ45<=>ST Multimode, 2000 метр.
FL-508

Конвертер/Converter
UTP/STP<=>Fiber Optic
10 Base-T<=>10 Base-FL
RJ45<=>ST Multimode
2000 метр.

     10Base-T/FL converter is designed to connect your existing 10Base-T Ethernet to a 10Base-FL network with fiber optic cable up to 2,000 meters. The converter simply repeats signals from 10Base-T Ethernet to a suitable form for transmission over fiber optic cable to 10Base-FL link. No more pair cross-over patch cords, You can always use pin-to-pin patch cord between Converter and Hub or workstation, simply select the right position on the 10Base-t switch for either Hub or workstation. It also provides a two-position LINK Enable/Disable Jumper to select 10Base-t or pre-10Base-T Ethernet connections. The LNON, COL. XMT, POWER, RCV,JAB and LINK LED lights simplify trouble shooting and network maintenance.

Interface	RJ45 jack for 10Base-T connection; ST connector for 10Base-FL fiber optic connection
Cable type	Category 3,4 or 5 UTP cable for 10Base-T 62.5/125um multi-mode duplex fiber optic cable for 10Base-FL
Cable length	100 meter max. UTP for 10Base-T 2,000 meter max. fiber cable for 10Base-FL
Transmission type	Baseband
Standards	IEEE802.3 10Base-T, 10Base-FL Ethernet
Connection switch	2-position 10Base-T switch on RJ-45 side (Hub or W/S) for either hub or W/S connection
LINK Jumper:	2-position jumper (Enable or Disable for 10Base-T or Pre-10Base-T Ethernet connection.
LEDs	LMON, COL, XMT, POWER, RCV, JAB, LINK
Temperature	0 to 50 (standard operating)
Dimensions	90mm x 50mm x 20 mm
Power	9V DC Input, 300mA
Certification	FCC Class A, CE